SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013
PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220
Selection Guide
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Description
Min. Typ.
High Efficiency Red (GaAsP/GaP) White Diffused
31000 57000 Common Anode, Rt.
Hand Decimal
*9000 *17000
SA23-11EWA
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 617 nm IF=20mA
Δλ1/2 Spectral Line Half-width
High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF
[2]
Forward Voltage
(DP)
High Efficiency Red
8
(4.0)
10.0
(5.0)
V IF=20mA
IR
Reverse Current
(Per Chip)
High Efficiency Red
10
(10)
uA
VR=5V
(V
R=5V)
Parameter High Efficiency Red Units
Power dissipation
(DP)
300
(150)
mW
DC Forward Current
(DP)
30
(30)
mA
Peak Forward Current [1]
(DP)
160
(160)
mA
Reverse Voltage
(Per Chip)
5
(5)
V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.